Manufacturing experience since 1998 · Company established 2008Since 1998
Chain Driven Belt by YIYI Mesh Belt
Chain Driven Belt detailChain Driven Belt detailChain Driven Belt detailChain Driven Belt detail
11 · CHAIN

Chain Driven Belt

A chain driven belt, also called a chain edge belt or chain link conveyor belt, is a wire mesh belt carried and driven by roller chains on both edges, used for heat treatment, parts washing, frying and heavy industrial conveying. This page covers metal conveyor belts, not the belt-drive versus chain-drive choice in power transmission. Because the belt, the chain and the sprocket have to work as one system, we review all three together — a chain model alone is never enough to build from.

ISO 9001:2015Made to Sample or DrawingSUS304 / SUS316 & Carbon SteelIn-House Wire Drawing
Quote This Belt Download Spec (PDF)

QUICK FACTS

  • Manufacturer: YIYI Mesh Belt (Ningjin Yiyi Mesh Belt Co., Ltd.), Ningjin, Shandong, China · est. 2008, manufacturing experience since 1998 · ISO 9001:2015 quality management system
  • Material: SUS304 / SUS316 / Carbon steel
  • Width: 300–5000 mm (11.81–196.85 in)
  • Built to: your approved drawing, first article confirmed before production

Chain Driven Belt documents

Read the full specification before you send your drawing

Documents from our Document Library: the dimensions and options to compare with your current belt, and how the belt is made and inspected at our factory in Ningjin, Shandong.

YIYI Mesh Belt Chain Driven Belt Technical Specification
Chain Driven Belt Technical Specification19 pages · read online page by page or download the PDF
  • Seven chain pitches, 12.7 to 63.5 mm
  • Edge, flight and side-guide options
  • Matching sprockets
YIYI Mesh Belt Chain Driven Belt Production and Quality Control
Chain Driven Belt Production and Quality Control18 pages · read online page by page or download the PDF
  • Chain component manufacturing
  • Chain construction and attachment review
  • Final inspection after surface treatment
Width
300–5000mm
Chain pitch
12.7–63.5mm
Chains
#40–C2102
Final inspection
100%
every belt, before packing
·
AT A GLANCE

Chain Driven Belt Properties

MaterialSUS304, SUS316 or carbon steel, chosen for your process conditions
SurfaceSpiral wire mesh on cross rods
OpeningsSpiral pitch 3–20 mm and mesh rod pitch 4–20 mm set the openings, confirmed on the drawing
DriveSprockets engage roller chains on both edges. Chain pitch 12.7–63.5 mm; references #40, #50 and C2042 to C2102
Edge optionsRod ends washer welded or cotter pinned
AccessoriesSide guide, tube, side roller, square bar, flights or side plate, to the drawing
Width300–5000 mm (11.81–196.85 in)
ApplicationsFood: frying, blanching. Industrial: heat treatment, parts washing, drying, heavy-duty conveying
Chain Driven Belt structure: roller chain, cross rod, washer-welded rod end and spiral wire mesh
Structure on a real order: C2042 roller chain at 25.4 mm pitch, 15.88 mm roller, 6 mm cross rod at 50.8 mm spacing, 1.0 mm spiral wire, rod ends washer welded. Your own sizes are set on the approved drawing.
02
SPECIFICATIONS

Chain Driven Belt Specifications (mm / inch)

Reference ranges in mm and inch, not free combinations. The approved drawing sets the final values.

ParameterMetric (mm)Inch (in)
MaterialSUS304 / SUS316 / Carbon steel—
Belt (spiral) pitch3–20 mm0.118–0.787 in
Rod pitch4–20 mm0.157–0.787 in
Wire1–3 mm0.039–0.118 in
Chain pitch12.7 / 15.875 / 25.4 / 31.75 / 38.1 / 50.8 / 63.5 mm0.500 / 0.625 / 1.000 / 1.250 / 1.500 / 2.000 / 2.500 in
Chain models#40 / #50 / C2042 / C2052 / C2062 / C2082 / C2102—
Belt width300–5000 mm / custom11.81–196.85 in
Chain Driven Belt dimensional drawing

WHAT TO SEND FOR A QUOTE

Belt type · chain type · chain pitch · sprocket information · equipment · drawing · width · application
03
CONFIGURATION

Chain Driven Belt Edge, Drive and Accessory Options

Every option is confirmed on the approved drawing before production.

  • Chain: roller chains from #40 to C2102; selected stainless chains (approx. 25.4–50.8 mm pitch) can be made in-house depending on specification
  • Material: SUS304, SUS316 or carbon steel
  • Accessories: chains and sprockets; rods and retention per project

Pitch measured on a real belt

Chain Driven Belt pitch 12.7 mm / 0.500 in measured
ROD PITCH12.7 mm0.500 in
Chain Driven Belt pitch 25.4 mm / 1.000 in measured
ROD PITCH25.4 mm1.000 in
Chain Driven Belt pitch 31.75 mm / 1.250 in measured
ROD PITCH31.75 mm1.250 in
Chain Driven Belt pitch 38.1 mm / 1.500 in measured
ROD PITCH38.1 mm1.500 in
Chain Driven Belt pitch 50.8 mm / 2.000 in measured
ROD PITCH50.8 mm2.000 in
Chain Driven Belt pitch 63.5 mm / 2.500 in measured
ROD PITCH63.5 mm2.500 in

Edge finish

Chain Driven Belt Washer Welded
Washer Welded
Chain Driven Belt Cotter Pin
Cotter Pin

Material

Chain Driven Belt SUS304
SUS304
Chain Driven Belt SUS316
SUS316
Chain Driven Belt Carbon Steel
Carbon Steel

Accessories & construction options

Chain Driven Belt Blue Plastic Side Guide
Blue Plastic Side Guide
Chain Driven Belt Tube
Tube
Chain Driven Belt Stainless Steel Side Roller
Stainless Steel Side Roller
Chain Driven Belt Square Bar
Square Bar
Chain Driven Belt Spiral Wire Flights
Spiral Wire Flights
Chain Driven Belt Side Plate
Side Plate
Chain Driven Belt “L” Type Flights
“L” Type Flights

Matching drive sprockets

Chain Driven Belt SUS 304 / SUS 316 sprocket
SUS 304 / SUS 316 sprocket
Chain Driven Belt SUS 304 / SUS 316 sprocket
SUS 304 / SUS 316 sprocket
Chain Driven Belt Mild Steel sprocket
Mild Steel sprocket
Chain Driven Belt Mild Steel sprocket
Mild Steel sprocket
04
APPLICATIONS

Chain Driven Belt Applications by Industry: Food and Industrial

Food: frying and blanching lines. Industrial: heat treatment, parts washing, washing and drying, and heavy-duty conveying. Suitability depends on belt specification, temperature and equipment design. We confirm it during specification review. See all 15 applications →

01

Frying

Frying lines, configured to your equipment.

02

Heat Treatment

Heat treatment lines, with material confirmed for the temperature.

04

Heavy-Duty

Heavy-duty conveying with high loads.

05

Blanching

Blanching and pasteurizing lines.

05
HOW WE MAKE AND CHECK IT

From wire coil to export crate

Real photos from our Ningjin factory. Every formal belt passes final inspection against your drawing before packing.

Raw Material Production Equipment – Chain Driven Belt
Raw Material Production EquipmentIn-house raw material production
Stainless Steel Wire Drawing Equipment – Chain Driven Belt
Stainless Steel Wire Drawing EquipmentWe draw our own stainless wire
Raw Material Inspection Equipment – Chain Driven Belt
Raw Material Inspection EquipmentSpectral and hardness testing of incoming material
Automatic Chain Assembly Equipment – Chain Driven Belt
Automatic Chain Assembly EquipmentAutomatic chain assembly
Trial Production Sample Inspection – Chain Driven Belt
Trial Production Sample InspectionFirst article confirmed before mass production
Finished Product Inspection – Chain Driven Belt
Finished Product InspectionFinished belt measured against drawing
Edge Finish Inspection – Chain Driven Belt
Edge Finish InspectionEdge finish checked
Wooden Crate Packing – Chain Driven Belt
Wooden Crate PackingPacked in export wooden crates
Don’t take our word for it — inspect it. Third-party inspection and factory audits are supported on request, and customer factory visits are welcome.
Plan a Visit
·
PRODUCTION

How a Chain Driven Belt Is Made and Inspected

YIYI MESH BELT Chain Driven Belt production and quality control video

Watch how a chain driven belt is made and inspected at our Ningjin factory, from component manufacturing to final inspection.

·
PROJECTS

Chain Driven Belt Projects We Have Built

Real orders, with customer details withheld.

Three SUS304 belts for frying equipment, built to customer-signed drawings

Frying equipment manufacturer, East Asia. The customer sent drawings and we quoted, then drew the belts, and the customer signed the drawings back. A trial section was measured and photographed for approval before mass production. Spare rods, washers, spiral wires and chain pins were supplied with the belts.

Chain centre distance350 / 500 / 650 mm
ChainC2042, 25.4 mm pitch, roller Ø 15.88 mm
Cross rodØ 6 mm at 50.8 mm spacing
Spiral wire1.0 mm, 3 mm spiral pitch
EdgeRod ends washer welded
YIYI MESH BELT Chain Driven Belt finished SUS304 belt
Finished belt
YIYI MESH BELT Chain Driven Belt roller chain edge
Roller chain edge
YIYI MESH BELT Chain Driven Belt caliper checking 25.4 mm chain pitch
Chain pitch · 25.4 mm
YIYI MESH BELT Chain Driven Belt caliper checking 50.8 mm rod spacing
Rod spacing · 50.8 mm
YIYI MESH BELT Chain Driven Belt caliper checking the 15.88 mm roller
Roller Ø 15.88 mm

SUS304 conveyor chain at 100 mm pitch, supplied to an approved drawing

Seafood processing plant, Northern Europe. The end user sent the chain specification for a quotation. We drew the chain and the customer signed the drawing back. The chain was sourced to that drawing: a trial was confirmed before mass production, and every dimension was checked, photographed and sent to the customer before shipment.

Chain pitch100 mm
RollerØ 22 mm, free-turning
Plates6.5 × 35 mm, 140 mm long
PinØ 14 mm, riveted
MaterialSUS304
YIYI MESH BELT SUS304 conveyor chain caliper checking 100 mm pitch
Chain pitch · 100 mm
YIYI MESH BELT SUS304 conveyor chain caliper checking 35 mm plate height
Plate height · 35 mm
YIYI MESH BELT SUS304 conveyor chain caliper checking the 14 mm pin
Pin Ø 14 mm

Send Your Drawing

06
BUYER QUESTIONS

What Buyers Ask Before Ordering a Chain Driven Belt

The questions we hear most, answered from how we actually build and check this belt.

01

Is this belt really made in your own factory?

Wire and round bar are drawn in our own workshop in Ningjin, Shandong, and the belt is built there. Selected stainless chains of about 25.4–50.8 mm pitch can be made in-house depending on specification. Carbon-steel and special chains are sourced to specification and checked before shipment.

02

Will the chain fit my sprockets?

A chain model alone does not fix the pitch, rollers or sprocket. Chain standard, pitch and sprocket profile are confirmed together on the drawing before quoting. Sprockets are made by specialist partners to our specification, and we check the finished parts.

03

Will a replacement mesh match?

Mesh pitch and chain pitch are two different numbers. We measure and specify them separately, then measure a trial section against your approved drawing before full production.

04

How do you control the edge welds?

Edge welds are checked by eye along the belt, and burnt sections are not shipped. Every belt is also checked for lap welds, where a weld bridges onto a part that should move.

05

Will the mesh edge stay straight?

Edge rods can bend during assembly or welding, so mesh edges are checked straight along the belt before packing.

06

Is the chain right for my load?

The chain reference is chosen for the load on the drawing, and the chain is checked for damage before shipment.

07

How do I know the material is what you say it is?

We draw wire and round bar in-house, and each incoming batch is checked for composition and hardness. Buyers often ask for a mill test report (MTR) or mill test certificate (MTC). Tell us which documents your order needs and we confirm them in the quotation.

08

How will the belt be packed?

Clean and dry, in waterproof film and plywood or fumigated wooden cases, with an English shipping list, for sea, air or rail.

09

What happens if a belt does not meet the drawing?

It does not go to packing. It is recorded, reworked or remade, and inspected again. A 100% final inspection is not a zero-defect or lifetime guarantee, but you see measured photos and the inspection report of your own belt before shipment.

10

How long will it take?

Lead time is confirmed per order in the quotation. Progress updates are agreed for each order, covering material and tooling status.

Send Your Drawing

07
FAQ

What questions do you have for us?

Q01

What is a chain driven belt?

A wire mesh belt fitted with side chains, so a chain-and-sprocket drive carries and drives the belt.

Q02

Which chain pitches do you use?

Chain pitches of 12.7, 15.875, 25.4, 31.75, 38.1, 50.8 and 63.5 mm, including #40, #50 and C2042–C2102 models.

Q03

What widths can you make?

From 300 to 5000 mm, or to your drawing.

Q04

Do you supply the chain and sprockets too?

Yes. Chains and sprockets are supplied with the belt and reviewed as one system.

Q05

Is the chain model enough to quote?

No. We also need the chain pitch, sprocket information, equipment and a drawing, because the model alone doesn't fix pitch, material or sprocket.

Q06

Can I inspect the belt or visit the factory?

Yes. Third-party inspection is supported on request, and customer factory visits are welcome.

Q07

What material documents come with the belt?

Buyers often ask for a mill test report (MTR) or mill test certificate (MTC). Each incoming batch of wire and rod is checked against steel-mill material documentation, with spectral and hardness testing. Tell us which documents your order needs and we confirm them in the quotation. Read more about material documentation.

Q08

What does a chain belt do?

It carries product through a process line while roller chains on both edges take the drive from the sprockets. The chain moves the belt, and the mesh carries the product.

Q09

What is a chain belt called?

Buyers also call it a chain edge belt, a chain-edged wire mesh belt, a chain link conveyor belt or a chain driven belt conveyor.

Q10

Chain-driven or friction-driven mesh belt: which is better?

Neither suits every line. Sprockets engage a chain-driven belt positively through its chains, while a friction-driven belt relies on contact with a drive roll. We build to the drive your equipment uses, confirmed on the drawing.

Q11

What is a chain-driven conveyor?

A conveyor whose belt is moved by chains running on sprockets at both edges, with wire mesh or plates between the chains. The conveyor belt chain, the sprocket and the belt are confirmed together.

?

Still have a question? Ask our engineers.

Send your drawing, a photo or a worn sample. An engineer reviews it before we quote.

Sunny YeGlobal Sales Director · YIYI Mesh Belt
Hi, I'm Sunny. Tell me what belt you're working on, or just send a photo of your current one. I'll personally make sure an engineer looks at it.
Opens WhatsApp with your first line ready — just press send.
or leave your details

Quick Quote

We reply as soon as we see your message, within 8 working hours · No obligation · Your details are used only to reply to you.